Administrator’s Guide for SIP-T46G IP Phone
44
2. Select Enabled from the pull-down list of Manual Time.
3. Enter the date and time in the corresponding fields.
4. Click Confirm to accept the change.
To configure the date and time format via web user interface:
1. Click on Settings->Time & Date.
2. Select the desired value from the pull-down list of Time Format.
3. Select the desired value from the pull-down list of Date Format.
4. Click Confirm to accept the change.
To configure the NTP server and time zone via phone user interface:
1. Press Menu->Basic->Date & Time->General->SNTP.
2. Press or , or the Switch soft key to select the time zone that applies to your
area from the Time Zone field.
To Next Page
Loading...
