TG Series User Guide
25/86
5. (Optional) Enable clear stat and set the clear period and time. The system will clear the call
duration data on the TG gateway monthly.
a. Set Enable Clear Stat to Yes.
b. Set Clear Period to Every Month, and choose the clear day.
c. Set the Clear Period Time.
6. Click Save and Apply Changes.
Set Talk Time Alarm of Mobile Trunks
You can set alarm of talk time for mobile trunks to remind you that the monthly talk time of the mobile
trunks is running out.
Procedure
1. Navigate to Gateway > Mobile List > Mobile List, select the desired module, click .
2. Click the Call Duration Settings tab.
3. Set the value of Alarm threshold.
4. Choose a GSM/3G Port to make alarm calls.
Note: Make sure the port is available to make calls.
5. Choose an alarm Prompt.
To Next Page
Loading...
Need help?
General
