TG Series User Guide
78/86
The system has 3 default IP blacklist rules, you can edit them or add a new one.
Procedure
1. Navigate to System > Security Center > IP Blacklist, click Add Rule.
2. Enter the desired port in Port field.
3. Choose the Protocol of this rule.
4. Enter the allowed IP packets number in the specific time interval in IP Packets field.
5. Enter the time interval to receive IP packets in Time Interval field.
For example, IP Packets is set to 90, Time Interval is set to 60, and it means 90 IP packets are
allowed in 60 seconds.
6. Click Save and Apply Changes.
Delete Blocked IP Address
You can delete the blocked IP address if the system blocks your trusted IP address.
Procedure
1. Navigate to System > Security Center > IP Blacklist.
2. Choose the desired IP address from IP Blacklist list, click .
To Next Page
Loading...
Need help?
General
