2.
Select the setup file to be read by using the arrow keys and DISP/ENTER.
* The setup data file is in the root directory (
/
).
To cancel the operation, press ESC.
3.
Press the DISP/ENTER key.
The setup data is loaded.
Explanation
• Setup Data Files
• The setup data le extension is .PDL.
• The maximum setup data le size is about 200 KB.
• The following settings are also saved.
• The current monitor display condition.
• The Jump default display setting.
• Favorite display key data.
• Loading Setup Data
• The monitor display condition, Jump default display setting, and favorite display key
settings are also loaded.
• If the loaded setup data is not applied, check the error log (see section 5.10).
•
While setup data is being loaded, key operations, communication operations, and
remote control operations cannot be executed.
4.9 Saving and Loading Setup Data
To Next Page
Loading...
