6.3 Setting the Secondary Trend Interval
This section explains how to switch the trend interval to the secondary interval during
memory sampling. You can configure the MV to automatically write a message when the
trend interval is switched.
For an explanation of these functions, see section 1.4.
Display
• Switching the Trend Interval and Writing a Message (when using the
secondary trend interval)
MV1000
Press MENU and then select Menu tab > Basic setting mode > Environment tab >
View, Message.
MV2000
Press MENU and then select Menu tab > Basic setting mode > Environment tab >
View, Message, Input, Alarm.
• Second interval [/div]
MV1000
Press MENU and then select Menu tab > Display > Trend.
To Next Page
Loading...
Need help?
General
