8.2 Allowing Only Registered Users to Operate the
MV (login function)
This section explains how to configure the MV so that only registered users can operate
the MV.
For an explanation of this function, see section 1.8.
Display
• Login Function
MV1000
Press MENU and then select Menu tab > Basic sett
ing mode > Environment tab >
Security, Media save.
MV2000
Press MENU and then select Menu tab > Basic sett
ing mode > Environment tab >
Security, Media save, Batch.
• Logout Method
Press MENU and then select Menu tab > Basic setting mode > Menu tab > Login >
Basic settings.
To Next Page
Loading...
Need help?
General
