YOKOGAWA MVAdvanced MV1000 Series - 3.5 Setting the Auxiliary Alarm Function

3-7
IM MV1000-01E
Measurement Channels and Alarms
1
2
3
4
5
6
7
8
9
10
11
12
13
App
Index
3.5 Setting the Auxiliary Alarm Function
This section explains how to configure alarm display and output relays.
For an explanation of these functions, see section 1.3.
Display
MV1000
Press MENU and then select Menu tab > Basic setting mode > Menu tab > Alarm
settings > Basic sett
ing > Switch, Relay or Hysteresis.
MV2000
Press MENU and then select Menu tab > Basic setting mode > Menu tab > Hysteresis.
Settings
• Basic setting > Reflash
To set the reash operation on alarm output relays, select On. The reash function
affects the rst three output relays.