YOKOGAWA MVAdvanced MV1000 Series User Manual

7-5
IM MV1000-01E
Event Action
1
2
3
4
5
6
7
8
9
10
11
12
13
App
Index
7.3 Setting the Match Time Timer
You can set the time match condition that is used for the event action function. These
timers are also used in TLOG computation.
For an explanation of the event action function, see section 7.1.
Display
Press MENU and then select Menu tab > Timer, Event action > MatchTimeTimer.
Settings
You cannot change these settings during memory sampling or computation.
• Timer number
You can set four match time conditions (1 to 4).
• Kind
Setting Description
Day Sets the time match condition for a day.
Week Sets the time match condition for a week.
Month Sets the time match condition for a month.
Year Sets the time match condition for a year.
Set the items with check marks in the following table according to the Kind setting.
Settings Kind
Day Week Month Year
Month

Day
 
Day of the week

Hour:Minute
   
• Month
Set the month.
• Day
Set the day.
• Day of the week
Set the day of the week.
• Hour:Minute
Set the time in the range of 00:00 to 23:59.
• Timer action
Setting Description
Single Executes the action once when the condition is met.
You can reset a timer by pressing FUNC after the timer expires.
Repeat Executes the action each time the condition is met.

YOKOGAWA MVAdvanced MV1000 Series Specifications

General

Brand	YOKOGAWA
Model	MVAdvanced MV1000 Series
Category	Laboratory Equipment
Language	English