3.4 Setting the Moving Average of the Input
This section explains how to set the measurement channel moving average function.
This function suppresses the effects of noise.
For an explanation of this function, see section 1.2.
Display
Press MENU and then select > Menu tab > Meas channel > Moving average.
Settings
Average value
Scan Interval
Count
Average value
• First-CH, Last-CH
Select the target channels.
• Moving average > On/Off
Select On to use the moving average function.
• Moving average > Count
Set the number of moving average data points from within the range of 2 to 400.
To Next Page
Loading...
