8.3 Logging in and Logging Out
This section explains how to log into the MV by using keys. For instructions on how to
operate the MV via a communication interface, see the Communication Interface User’s
Manual (IM MV1000-17E).
Procedure
• Logging In
1.
In Operation Mode, press FUNC.
A list of registered user names appears.
2.
Press the arrow keys to select a user name, and press DISP/ENTER.
A window opens for you to enter the password.
3.
Enter the password,* and press DISP/ENTER.
The MV is ready for key operation. The status display section shows the logged-in user
name.
* The password that you enter appears as a string of asterisks (********).
• Logging Out
Logging Out Using Keys
1.
In Operation Mode, press FUNC.
The function menu appears.
2.
Press the Logout soft key.
The MV logs you out. The user name disappears from the status display section.
Auto Logout
If auto logout is enabled, the MV will automatically log you out if you do not operate
the keys for a specied time.
To Next Page
Loading...
Need help?
General
