YOKOGAWA WT5000 - 6.4 Bar Graph Display

6-11
IM WT5000-02EN
6.4 Bar Graph Display
This instrument shows on the screen the harmonic orders and magnitudes of the voltage, current, and
the like applied to the input elements with bar graphs.
► “Bar Graph Display (Bar)” in the features guide
► “Display Format (Form, Bar)” in the features guide
► “Display Items (Items, Bar)” in the features guide
Using an example, this section explains how to display measurement results with bar graphs.
In addition, this section explains operating procedures using the following setup methods.
• Procedure Using the Setup Menu (see chapter 1)
• Procedure Using the Menu Icons (see page iii)
Bar Graph Display Screen (example of Group1 Triad display)
Bar graph display of input element 1
Bar graph of voltage U1
Item No.1 display
Bar graph of current I1
Item No.2 display
Bar graph of power P1
Item No.3 display
Procedure Using the Setup Menu
1.
Tap the Setup icon , or press MENU under SETUP.
2.
Tap Computation/Output tab. A computation and output settings overview screen appears.
Pressing ESC closes the overview screen.
3.
Tap Display.
A display format setup screen (Numeric/Graph) appears. For details, see section 6.1.