15-7
IM WT5000-02EN
Operations on the PC
1.
Open a Web browser on a PC that is connected to the network.
2.
Specify the following address.
http://xxx.xxx.xxx.xxx/
(Type this instrument’s IP address for xxx.xxx.xxx.xxx.)
3.
Enter the user name and password that you entered on the screen shown on the previous page
to connect to the instrument. The instrument’s home screen appears.
If you set the user name to “anonymous,” you can connect to the instrument without entering a password.
4.
Click a side navigation item. The corresponding screen appears.
The instrument’s IP address
Side navigation
Note
• Disable the pop-up blocker feature on your Web browser when you want to capture the screen image.
• While using the Web server feature, there may be a delay in response or no response depending on the
network environment.
15.4 Web Server Feature
To Next Page
Loading...
