16-10
IM WT5000-02EN
Executing the Soft Keyboard Test
4.
Tap Test Item to select Key Board.
• Front Panel Key Test
5.
Tap Test Exec. A front panel key test and indicator test will be executed.
Utility tab
Configure the self-test.
Set the item to test (Memory, Key Board).
Executes the test
This self-test tests the panel keys and
indicators.
Displays the keyboard
• Onscreen Soft Keyboard Test
5.
Tap Soft Key. A soft keyboard appears.
6.
Tap Test Exec. A soft keyboard test will be executed.
Note
You can also display the utility settings overview screen by moving the cursor on the Utility tab using the
arrow keys and then pressing SET.
Procedure Using Keys
See section 16.1.
16.7 Self-Test
To Next Page
Loading...
Need help?
General
