YOKOGAWA WT5000 - Page 34

1-16
IM WT5000-02EN
Note
• You can also display the input settings overview screen by moving the cursor on the Utility tab using the
arrow keys and then pressing SET.
• You can also display the setup menu screen from the navigation window that appears immediately after
power-on.
Displays the setup menu screen
Navigation window
Remote Control Settings (Remote Control) ►section 16.1
3.
Tap Remote Control.
A remote control setup screen (Network(VXI-11/GP-IB/USB(USB-TMC)) appears.
Utility tab
Remote Control
button
Network timeout
GP-IB address
USB (USB-TMC)
Serial number
Communication
commands
(WT-compatible
commands)
IP address display
1.4 Utility Settings Overview