SonTek/YSI
ADVField Software Manual (September 1, 2001) 2
parameter files, software, 7
peak level, 23
peak pos, 23
pitch, 13
probe configuration download, 41
probe configuration file, 3, 6
record to file, 10
RecordAmpCorr, 39
RecordCompass, 39
RecordCtd, 39
recorded data, 16
recorded data structure, 38
recorded data types, 39
Recorder [SonUtils], 48
recorder data extraction, 35
RecordExtPres, 39
RecordExtSensor, 39
Recording, 15
recording mode, 9
recording mode, burst, 10
recording mode, continuous, 10
recording time left, 12
recording to file, 12
recording, disable, 7
RecordSensor, 39
RecordStat, 39
roll, 13
salinity, 9
sample number, 13
sample program output (adfcheck), 21
sample records, 39
samples per burst, 9
sampling rate, 9
set files, 3
setup data, extracting, 37
setup mode, 8
signal-to-noise ratio, 13
SNR1/SNR2/SNR3, 13
software installation, 1
software parameter files, 7
SONREC.EXE, 2, 35
SonRecW, 48
SONTERM.EXE, 2, 33
SonTermW (Terminal), 44
SonUtils, 43
Compass, 46
Recorder, 48
Terminal, 44
source code, 3
speed of sound, 9
standard deviation, 13
start data acquisition, 10
start time, 13
Status (indicator), 15
status information, 12
support, 63
synchronization, 9
tabular data, 13
temperature, 9
Terminal [SonUtils], 44
terminal emulator, 33
test time, 13
time-series data, extracting, 40
units system, 8
vel range, 13
velocity range, 9
ViewHydra, 51
ViewHydraPro, 51
Vx/Vy/Vz or ENU, 13
Waiting For Sync, 15
water temperature / salinity, 9
XYZ, 13