Zebra PS20 - Setting the Date and Time; General Sound Setting

Settings
36
2.
Touch Display > Advanced.
3. Touch Touch panel mode.
4.
Select:
5. Touch the Home button.
Setting the Date and Time
You are only required to set the time zone or set the date and time if the wireless LAN does not support
Network Time Protocol (NTP).
1. Go to Settings.
2. Touch System > Date & time.
3. Touch Date.
4. In the calendar, set today’s date.
5. Touch OK.
6. Touch Time.
7. Touch the green circle, drag to the current hour and then release.
8. Touch the green circle, drag to the current minute and then release.
9. Touch AM or PM.
10.Touch OK.
11.Touch Use 24-hour format.
12.Touch the Home button.
General Sound Setting
Use the Sound settings to configure media and alarm volumes.
1. Go to Settings.
2. Touch Sound.
3. Touch an option to set sounds.
MC18 Product Reference Guide.book Page 36 Tuesday, June 30, 2020 9:07 PM