EasyManuals Logo

Zebra PS20 Product Reference Guide

Zebra PS20
151 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #46 background imageLoading...
Page #46 background image
Applications
46
Level - The current battery charge level as a percentage. Displays -% when level is unknown.
Wear - The health of the battery in graphical form. When the wear level exceeds 80%, the bar color
changes to red.
Health - The health of the battery. If a critical error occurs, appears. Touch to view the error
description.
Decommission - The battery is past its useful life and should be replaced. See system
administrator.
Good - The battery is good.
Charge error - An error occurred while charging. See system administrator.
Over Current - An over-current condition occurred. See system administrator.
Dead - The battery has no charge. Replace the battery.
Over Voltage - An over-voltage condition occurred. See system administrator.
Below Temperature - The battery temperature is below the operating temperature. See system
administrator.
Failure Detected - A failure has been detected in the battery. See system administrator.
Unknown - See system administrator.
Charge Status
Not charging - The device is not connected to AC power.
Charging-AC - The device is connected to AC power and charging.
Charging-USB - The device is connected to a host computer with a USB cable and charging.
Discharging - The battery is discharging.
Full - That the battery is fully charged.
Unknown - The battery status is unknown.
Time until Full - The amount of time until the battery is fully charged.
Time since charging - The amount of time since the device began charging.
Time until empty - The amount of time until the battery is empty.
Advanced info - Touch to view additional battery information.
Battery present status - Indicates that the battery is present.
Table 10 Battery Icon Description
Battery Icon Description
Battery charge level is between 85% and 100%.
Battery charge level is between 19% and 84%.
Battery charge level is between 0% and 18%.
MC18 Product Reference Guide.book Page 46 Tuesday, June 30, 2020 9:07 PM

Table of Contents

Other manuals for Zebra PS20

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zebra PS20 and is the answer not in the manual?

Zebra PS20 Specifications

General IconGeneral
Operating system version11
Operating system installedAndroid
Operating system upgradeableYes
Number of cores8
Processor model660
Processor familySnapdragon
Processor frequency2.2 GHz
Processor manufacturerQualcomm
RFID reader-
Scanner type1D/2D
CertificationWFA
Product colorLight grey
Phone functionNo
Display diagonal4 \
Display resolution- pixels
SpeakersMono
Number of microphones1
Flash memory16 GB
Internal memory4 GB
Battery capacity3500 mAh
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)5 - 95 %
Electrostatic Discharge (ESD) protection (air)15 kV
Electrostatic Discharge (ESD) protection (contact)8 kV
Data networkNot supported
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Bluetooth version5.0
Security algorithms40-bit WEP, 104-bit WEP, EAP-GTC, EAP-TLS, EAP-TTLS, LEAP, MSCHAPv2, PEAP, TKIP, WPA, WPA-Enterprise, WPA2, WPA2-Enterprise
Quantity per pack10 pc(s)
Harmonized System (HS) code84713000
Weight and Dimensions IconWeight and Dimensions
Depth218 mm
Width78.6 mm
Height75 mm
Weight290 g

Related product manuals