Zeiss Axio Vert.A1 - Page 7

Axio Vert.A1 Table of Contents / List of Figures Carl Zeiss
05/2012 431030-7044-001 7
Fig. 4-8 Setting DIC ....................................................................................................................... 81
Fig. 4-9 Setting Relief Orientation on the iHMC ............................................................................. 83
Fig. 4-10 Centering Screws ............................................................................................................. 84
Fig. 4-11 Aligning of the Objective Zone Plate and the iHM Diaphragm ............................................ 85
Fig. 4-12 Setting Bright Field ........................................................................................................... 86
Fig. 4-13 Setting the Polarization ..................................................................................................... 86
Fig. 4-14 Setting Bright Field ........................................................................................................... 88
Fig. 4-15 Setting DIC/C-DIC ............................................................................................................. 90
Fig. 4-16 Setting the Polarization ..................................................................................................... 93
Fig. 4-17 Setting Fluorescence ......................................................................................................... 95
Fig. 4-18 Screw-on Options for Micromanipulators .......................................................................... 96
Fig. 5-1 Replacing Fuses ................................................................................................................ 98
NOTE
The figures integrated into the text bear numbers and captions. "Fig. 2-8", for instance, means the figure
in Section 2 identified by consecutive number 8. Details discussed in the text are marked with a reference
slash and a location number. In running text, "eyepiece tube (Fig. 2–8/4)" means that the eyepiece tube
is marked by location number 4 in Fig. 8 of Section 2.
Please refer to the Annex for an explanation of the abbreviations used.