SC800 User Manual
Page | 69 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Function Description of Access Control Terminal:
Function Name Description
Gate Control Mode
It toggles between ON or OFF switch to get into
gate control mode or not.
When set to ON, the interface removes the Door
Lock Delay, Door Sensor Delay, and Door Sensor
Type options.
Verification Mode
The supported verification mode includes
Password/Card, User ID Only, Password, Card
Only, Password + Card.
Door Available Time
Period
It sets the timing for the door so that the door is
accessible only during that period.
Normal Open Time
Period
It is the scheduled time-
Open" mode so that the door is always open
during this period.
Master Device
While configuring the master and slave devices,
you may set the state of the master as Out or In.
Out:
A record of verification on the master
device is a check-out record.
In: A record of verification on the master device
is a check-in record.
To Next Page
Loading...
Need help?
General
