SC800 User Manual
Page | 81 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Access Control Terminal:
Time Attendance Terminal:
Function Description of Access Control Terminal:
Function Name Description
Alarm on Password
When a user uses the
password verification
method, an alarm signal will be generated,
otherwise there will be no alarm signal.
Alarm Delay (s)
Alarm signal will not be transmitted until the
alarm delay time is elapsed. The value ranges
from 1 to 999 seconds.
Duress Password
Set the 6-digit duress password. When the user
enters this duress password for verification, an
alarm signal will be generated.
To Next Page
