SC800 User Manual
Page | 82 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Function Description of Time Attendance Terminal:
Function Name Description
Duress Function
Enable/Disable the duress function.
Alarm on Password
In [ON
] state, when a user uses password
verification method, alarm will be triggered. In
[OFF] state, no alarm signal will be triggered.
Alarm Delay (s)
Alarm signal will not be transmitted until the
alarm delay time is elapsed. The value ranges
from 1 to 999 seconds.
To Next Page
Loading...
Need help?
General
