Zoom F4 - Outputting Alerts through Headphones (Alert Tone Level)

Output settings
Outputting alerts through headphones (Alert Tone Level)
102
Outputting alerts through headphones (Alert Tone Level)
1. Press m.
2. Use e to select OUTPUT,
and press E.
3. Use e to select HP Alert
Tone Lvl, and press E.
4. Use e to adjust the vol-
ume, and press m.
HINT
• This can be set to Off or between −48 and −12 dBFs.
• When set to Off, no alerts will be output.
When alerts sound Sound type
Remaining battery low 880Hz tone every 30 seconds 4 times
Recording starts 1000Hz tone 1 time
Recording stops 880Hz tone 2 times
Recording not possible 880Hz tone 3 times
The volume can be adjusted for alerts output from headphones when, for example, recording starts and stops.