Zoom F4 - Default Chapter; Setting the Threshold; Setting the Attack Time

Input settings
Input limiter
F
Multi Track Field Recorder
77
Setting the attack time
This sets the amount of time until compression starts after
the input signal exceeds the threshold.
5. Use e to select Attack
Time, and press E.
6. Use e to adjust the time,
and press m.
HINT
This can be set from 1 to 4 ms.
Setting the threshold
This sets the base level from which the limiter operates.
5. Use e to select Threshold
and press E.
6. Use e to adjust the set-
ting, and press m.
HINT
This can be set from −16 to −2 dBFS.