Recording
Recording process
22
Recording process
Connect
Turn power
on (ĺP.17)
Prepare before
recording
Record
(ĺP.29)
Play back
and check
(ĺP.49)
Check take
information
(ĺP.60)
• Connect mics, instruments,
audiovisual equipment and
other devices to Inputs 1–6.
(ĺ P.8)
• Connect a mic capsule to the
MIC IN connector. (ĺ P.9)
• Press to start and
to stop recording.
• You can also set marks.
• Press to start
recording a new track.
• Press to pause
• Press to start playback
and or to stop it.
• Marks, for example, can also
be set. (ĺ P.139)
• Check and edit
metadata.
1. Set the SD card and file format
for recording. (ĺ P.23)
• Set the recording file format for each
SD card separately.
2. Select the recording tracks
(ĺ P.25)
• Use track keys to select. The
indicators for selected tracks light red
and you will be able to monitor input
sounds.
• Press two track keys simultaneously
to link them as a stereo track.
3. Make recording settings
• You can make other settings,
including for dual channel recording
(ĺ P.33), pre recording (ĺ P.35), low
cut filter (ĺ P.74) and limiter (ĺ P.75)
functions.
4. Adjust the input levels
(ĺ P.27)
• Use to adjust each input.
• The side mic level can also be
adjusted when using a mid-side mic
capsule.
Follow the process below to record with the F.
The data created for each recording occurrence is called a "take".
To Next Page
Loading...
Need help?
General
