Zoom F4 - Setting the Monitoring Volume on the PFL Screen (PFL Mode)

Input settings
:L[[PUN[OLTVUP[VYPUN]VS\TLVU[OL7-3ZJYLLU7-34VKL
F
Multi Track Field Recorder
73
Setting the monitoring volume on the PFL screen (PFL Mode)
1. Press m.
2. Use e to select INPUT,
and press E.
3. Use e to select PFL Mode,
and press E.
4. Use e to select the track,
and press E.
HINT
Select All to set all the tracks at the same time.
5. Use e to select the setting,
and press E.
Setting value Explanation
PFL On the PFL screen, monitor the pre-fader sound.
SOLO On the PFL screen, monitor the post-fader sound.
NOTE
When the PFL screen is open during playback, the monitor-
ing sound will be post-fader (SOLO) regardless of the setting.
On the PFL screen, you can set the monitoring sound to be either pre-fader listening (PFL) or post-fader solo (SOLO).