Preparations
;\YUPUN[OLWV^LYVUHUKVɈ
F
Multi Track Field Recorder
17
Turning the power on and off
Turning the power on
1. Press and hold w briefly.
The w LED will light.
NOTE
• The first time you turn the power on after purchase, you
must set the date/time (→ P.18). You can also change this
setting later.
• If “No Card!” appears on the display, confirm that an SD
card is inserted properly.
• If “Protected!” appears on the display, the SD card
write-protection is enabled. Slide the lock switch on the
SD card to disable write-protection.
• If “Invalid Card!” appears on the display, the card is not
formatted correctly . Format the card or use a different
card. To format an SD card, see P.144
Turning the power off
1. Press and hold w briefly.
NOTE
Keep pressing it until the ZOOM logo appears on the LCD.
Disabling the Auto Power Off function
The power will automatically turn off if the F is unused
for 10 hours. If you want the power to stay on always, disable
the automatic power saving function.
1. Press m.
2. Use e to select SYSTEM,
and press E.
3. Use e to select Auto Power
Off, and press E.
4. Use e to select Off,
and press E.
To Next Page
Loading...
Need help?
General
