<ZPUN<:)M\UJ[PVUZ
Audio interface settings
124
Audio interface settings
This function allows the playback sound from the computer
or iOS device and the F inputs to be mixed and sent back
to the computer or iOS device (loop back).
You can use this function to add narration to music played
back from the computer and record the mix or stream it on
the computer, for example.
1. Press m.
2. Use e to select LOOP
BACK, and press E.
3. Use e to select On,
and press E.
Mixing inputs
You can adjust the mix balance of the inputs. Input signals
will be sent to the computer or iOS device using the balance
settings made here. When using a Stereo Mix setting, the
mixed stereo signal will be sent.
1. Open the mixer on the Home
Screen. (→ P.11)
2. Adjust the parameter settings.
See "Adjusting the input levels and monitoring balance"
(→P.27) for how to change settings.
The following settings can be made when using the F as an audio interface. See the relevant pages for details about
operation.
Setting loop back (Stereo Mix only)
To Next Page
Loading...
