Zoom F4 - Exchanging data with a computer (SD Card Reader); Connecting to a Computer; Disconnecting from Computer

<ZPUN<:)M\UJ[PVUZ
,_JOHUNPUNKH[H^P[OHJVTW\[LY:+*HYK9LHKLY
F
Multi Track Field Recorder
119
Exchanging data with a computer (SD Card Reader)
Connecting with a computer
1. Press m.
2. Use e to select USB,
and press E.
3. Use e to select SD Card
Reader, and press E.
4. Use a USB cable to connect the F and the
computer.
NOTE
• The supported operating systems are as follows.
Windows: Windows 7 or later
Mac OS: Mac OS X (10.8 or later)
• The F cannot operate on USB bus power. Use AA batteries
or a DC power supply.
HINT
When the F is connected to a computer, the SD cards loaded
in slots 1 and 2 are recognized as separate SD cards.
Disconnecting
1. Disconnect on the computer.
Windows:
Select
F
from "Safely Remove Hardware".
Mac OS:
Drag and drop the
F
icon into the Trash.
NOTE
Always conduct computer disconnection procedures before
disconnecting the USB cable.
2. Disconnect the cable from the computer and the
F, and press m.
By connecting with a computer, you can check and copy data on the cards.