Zoom F4 - Setting the user bits for internal timecode (Ubits); Setting User Bits Mode

;04,*6+,
Setting the user bits for internal timecode (Ubits)
F
Multi Track Field Recorder
11 3
1. Press m.
2. Use e to select TIMECODE
(TC), and press E.
3. Use e to select Ubits,
and press E.
▶ Continue to one of the following procedures.
Setting the user bits (Ubits) mode ................................................. P.11 3
Setting the user bits (Ubits) ............................................................ P.114
Setting the user bits (Ubits) mode
4. Use e to select Ubits, and press E.
5. Use e to select Mode,
and press E.
6. Use e to select the mode,
and press E.
Setting value Explanation
uu uu uu uu You can set these values as you like on the Edit screen.
mm dd yy uu The month, day and year are entered automatically in that
order using the RTC setting. You can set the "uu" value as
you like on the Edit screen.
dd mm yy uu The, day, month and year are entered automatically in that
order using the RTC setting. You can set the "uu" value as
you like on the Edit screen.
yy mm dd uu The year, month and day are entered automatically in that
order using the RTC setting. You can set the "uu" value as
you like on the Edit screen.
HINT
Only "uu" items can be changed on the Edit screen.
Setting the user bits for internal timecode (Ubits)
User bits are data that you can set to be included in the timecode. Up to 8 numbers (0–9) and letters (A–F) can be included.
Recording date information, for example, can be useful when editing later.