Zoom F4 - Updating the FRC-8 firmware; Checking FRC-8 Firmware Version; Updating FRC-8 Firmware

F
Multi Track Field Recorder
Updating the
R
ÄYT^HYL
Using an
R
131
Updating the R firmware
1. Connect the F and the R , referring
to "Using an
R as a controller (Connect)"
(→ P.125).
NOTE
Updating the firmware is not possible if the remaining bat-
tery or DC power supply charge is low. In this case, replace
the batteries with new ones or use a charged DC power
supply.
2. Copy the file for updating the firmware to the root
directory on an SD card.
3. Load the SD card into the SD CARD 1 slot.
NOTE
If an SD card is loaded in the SD CARD 2 slot, eject it.
4. Press m.
5. Use e to select USB,
and press E.
6. Use e to select FRC-8,
and press E.
▶ Continue to one of the following procedures.
Checking the firmware version ....................................................... P.132
Updating the firmware .................................................................... P.132
You can check the R firmware version and update it to the latest version.
An update file for the latest version can be downloaded from the ZOOM website (www.zoom.co.jp).