Zoom F4 - Applying Delay to the Output (Output Delay)

Output settings
Applying delay to the output (Output Delay)
F
Multi Track Field Recorder
97
Applying delay to the output (Output Delay)
1. Press m.
2. Use e to select OUTPUT,
and press E.
3. Use e to select Output
Delay, and press E.
4. Use e to select the output,
and press E.
HINT
Select All to set all the outputs at the same time.
5. Use e to adjust the delay
in frames, and press m.
HINT
This can be set from 0.0 to 10.0 frames.
NOTE
• Delays set in frames differ according to the frame rate of the
selected timecode.
• When Sample Rate is set to 192kHz, Output Delay is disabled.
By delaying output, you can correct timing differences for audio input into another device.