Input settings
Inverting the input phase (Phase Invert)
F
Multi Track Field Recorder
79
Inverting the input phase (Phase Invert)
1. Press m.
2. Use e to select INPUT,
and press E.
3. Use e to select Phase
Invert, and press E.
4. Use e to select the track,
and press E.
HINT
Select All to set all the tracks at the same time.
5. Use e to select On, and
press E.
The phase of the input signal can be inverted.
This is useful when sounds cancel each other out due to mic settings.
To Next Page
Loading...
