Zoom F4 - Loading SD Cards

Preparations
Loading SD cards
16
Loading SD cards
1. Turn the power off and then open the SD card slot
cover.
2. Insert the SD card into SD CARD slot 1 or 2.
To eject an SD card:
Push the card further into the slot and then pull it out.
NOTE
• Always turn the power off before inserting or removing
an SD card.
Inserting or removing a card while the power is on could
result in data loss.
• When inserting an SD card, be sure to insert the correct
end with the top side up as shown.
• If an SD card is not loaded, recording and playback are
not possible.
• To format an SD card, see P.144.