Zoom F4 - Using an FRC-8 as a controller (Connect); Connecting the FRC-8; Disconnecting the FRC-8

F
Multi Track Field Recorder
Using an
R
as a controller (Connect)
Using an
R
125
1. Press m.
2. Use e to select USB,
and press E.
3. Use e to select FRC-8,
and press E.
▶ Continue to one of the following procedures.
Connecting ....................................................................................... P.125
Disconnecting .................................................................................. P.125
Connecting
4. Use e to select Connect,
and press E.
5. Use e to select "Yes",
and press E.
6. Use a USB cable to connect the F and the
R .
7. Turn the R power ON.
NOTE
When disconnecting the FRC-8, select “Disconnect” before
unplugging the USB cable
Using an R as a controller (Connect)
By connecting the R to the F, you can use it to adjust trim, fader and pan settings, for example.