Zoom F4 - Page 118

Slate tones
Using slate tones (Slate Tone)
11 8
Using slate tones (Slate Tone) (continued)
Disabling the slate tone
To prevent accidental recording due to misoperation, you can
disable the t button.
3. Use e to select On/Off,
and press E.
4. Use e to select Off (Lock),
and press E.
Recording
3. Press c to start recording.
4. Press t.
NOTE
• When the slate tone is sounding, other signals input to tracks that
it is routed to are muted.
• The slate signal is output from the headphone L/R channels
regardless of routing settings.
• The MAIN OUT 1/2 and SUB OUT 1/2 faders do not affect the level
of the slate tone.
• The SLATE TONE indicator lights when the slate tone is sounding.
HINT
Press t for at least one second to enable slate tone input contin-
uously. Press t again to disable it.