Zoom F4 - Page 21

Preparations
Setting the power supply used (Power Source)
F
Multi Track Field Recorder
21
Setting the type of AA batteries (Int AA)
4. Use e to select Battery
Type, and press E.
5. Use e to select the type,
and press E.
NOTE
• When multiple power supplies are connected, they will
be used in the following order of priority.
1. DC power supply (DC IN)
2. AA batteries (Int AA)
• The voltages of each power supply are shown on the
display.
Setting the DC power supply (DC IN) nominal voltage
4. Use e to select Nominal
Voltage, and press E.
5. Use e to select the volt-
age, and press E.
HINT
• The nominal voltage is the voltage of the DC power supply
under normal conditions. This value should be indicated
on the exterior of the DC power supply.