Zoom F4 - Page 134

Various settings
Setting the level meter display (Level Meter)
134
Setting the level meter display (Level Meter) (continued)
Setting
value
Explanation
Peak Only
Scale: dBFS
Peak value held for
set time
Peak value shown
The actual peak level of the signal (dBFS) is shown.
VU + Peak
Scale: VU
(0 VU = −20 dBFS)
Peak value held for
set time
VU value shown
Both VU and peak level are shown simultaneously. In this
mode, the bars show VU and the dots above the VU show the
peak.
VU Only
Scale: VU
(0 VU = −20 dBFS)
VU value held for set timeVU value shown
This display style is close to human hearing.
Setting the peak hold time
4. Use e to select Peak Hold
Time, and press E.
5. Use e to adjust the peak
hold time, and press E.