Zoom F4 - Page 34

Recording
9LJVYKPUN[^V[YHJRZH[KPɈLYLU[SL]LSZ+\HS*OHUULS9LJ
34
Recording two tracks at different levels (Dual Channel Rec) (continued)
6. Turn a for the dual channel recording track to
adjust the input level.
See "Adjusting the input levels and monitoring balance"
(→P.27) for how to adjust input levels.
When Track 1 is selected, use a for Track 3 to adjust.
HINT
Dual channel recording increases the amount of space used
on SD cards.
NOTE
• When using dual channel recording, the track that is numbered
2 higher than the original track is used for the second recording.
For example, track 3 is used for the dual channel recording of
track 1 and track 4 is used for track 2. Dual channel recording
tracks cannot be used independently.
• When dual channel recording is enabled, if stereo-linking is
enabled or disabled for tracks 1/2, the same setting will be
applied to tracks 3/4.
• The limiter, high pass filter and other functions can be set inde-
pendently for the regular and dual recording tracks.