ZyXEL Communications 5 Series - How to Set up a 3 G WAN Connection; Inserting a 3 G Card; Figure 65 SECURITY > FIREWALL > Default Rule: Block from VPN to LAN

Chapter 5 Tutorials
ZyWALL 5/35/70 Series User’s Guide
130
Figure 65 SECURITY > FIREWALL > Default Rule: Block From VPN To LAN
5.4 How to Set up a 3G WAN Connection
This section shows you how to configure and set up a 3G WAN connection on the ZyWALL.
In this example, you have set up WAN 1 and want the ZyWALL to use both of the WAN
interfaces (the physical WAN port and 3G card) for Internet access at the same time.
5.4.1 Inserting a 3G Card
To enable and use the 3G WAN connection, you need to insert a 3G card into the ZyWALL.
" See Table 272 on page 773 for the 3G wireless cards you can use in the
ZyWALL 5.
1 Make sure the ZyWALL is off before inserting or removing a card (to avoid damage).