ZyXEL Communications 5 Series - Figure 407 Menu 12: IP Static Route Setup; Figure 408 Menu 12. 1: Edit IP Static Route; Table 239 Menu 12. 1: Edit IP Static Route

Chapter 43 IP Static Route Setup
ZyWALL 5/35/70 Series User’s Guide
670
Figure 407 Menu 12: IP Static Route Setup
Now, enter the index number of the static route that you want to configure.
Figure 408 Menu 12. 1: Edit IP Static Route
`The following table describes the IP Static Route Menu fields.
Menu 12 - IP Static Route Setup
1. Reserved 16. ________ 31. ________ 46. ________
2. Reserved 17. ________ 32. ________ 47. ________
3. ________ 18. ________ 33. ________ 48. ________
4. ________ 19. ________ 34. ________ 49. ________
5. ________ 20. ________ 35. ________ 50. ________
6. ________ 21. ________ 36. ________
7. ________ 22. ________ 37. ________
8. ________ 23. ________ 38. ________
9. ________ 24. ________ 39. ________
10. ________ 25. ________ 40. ________
11. ________ 26. ________ 41. ________
12. ________ 27. ________ 42. ________
13. ________ 28. ________ 43. ________
14. ________ 29. ________ 44. ________
15. ________ 30. ________ 45. ________
Enter selection number:
Menu 12.1 - Edit IP Static Route
Route #: 3
Route Name= ?
Active= No
Destination IP Address= ?
IP Subnet Mask= ?
Gateway IP Address= ?
Metric= 2
Private= No
Press ENTER to CONFIRM or ESC to CANCEL:
Table 239 Menu 12. 1: Edit IP Static Route
FIELD DESCRIPTION
Route # This is the index number of the static route that you chose in menu 12.
Route Name Enter a descriptive name for this route. This is for identification purposes only.
Active This field allows you to activate/deactivate this static route.