ZyXEL Communications 5 Series - SMT Menus Overview; Table 209 SMT Menus Overview

Chapter 34 Introducing the SMT
ZyWALL 5/35/70 Series User’s Guide
609
34.3.2 SMT Menus Overview
The following table gives you an overview of your ZyWALL’s various SMT menus.
26 Schedule Setup Use this menu to schedule outgoing calls.
99 Exit Use this menu to exit (necessary for remote configuration).
Table 208 Main Menu Summary
NO
.
MENU TITLE FUNCTION
Table 209 SMT Menus Overview
MENUS SUB MENUS
1 General Setup 1.1 Configure Dynamic DNS 1.1.1 DDNS Host Summary 1.1.1 DDNS Edit Host
2 WAN Setup 2.1 Advanced WAN Setup
3 LAN Setup 3.1 LAN Port Filter Setup
3.2 TCP/IP and DHCP
Ethernet Setup
3.2.1 IP Alias Setup
4 Internet Access Setup
5 DMZ Setup 5.1 DMZ Port Filter Setup
5.2 TCP/IP and DHCP
Ethernet Setup
5.2.1 IP Alias Setup
6 Route Setup 6.1 Route Assessment
6.2 Traffic Redirect
6.3 Route Failover
7 Wireless Setup 7.1 Wireless Setup 7.1.1 WLAN MAC Address
Filter
7.2 TCP/IP and DHCP
Ethernet Setup
7.2.1 IP Alias Setup
11 Remote Node Setup 11.1 Remote Node Profile 11.1.2 Remote Node Network
Layer Options
11.1.4 Remote Node Filter
11.2 Remote Node Profile 11.2.2 Remote Node Network
Layer Options
11.2.3 Remote Node Script
11.2.4 Remote Node Filter
11.3 Remote Node Profile
(Backup ISP)
11.3.2 Remote Node Network
Layer Options
11.3.3 Remote Node Script
11.3.4 Remote Node Filter
12 Static Routing Setup 12.1 Edit Static Route Setup
15 NAT Setup 15.1 Address Mapping Sets 15.1.x Address Mapping
Rules
15.1.x.x Address
Mapping Rule
15.2 NAT Server Sets 15.2.x NAT Server Setup 15.2.x.x - NAT Server
Configuration
15.3 Trigger Ports 15.3.x Trigger Port Setup