ZyXEL Communications 5 Series - Application and Subnet-Based Bandwidth Management Example; Figure 267 Subnet-Based Bandwidth Management Example; Table 139 Application and Subnet-Based Bandwidth Management Example

Chapter 25 Bandwidth Management Screens
ZyWALL 5/35/70 Series User’s Guide
466
Proportional Bandwidth Allocation
Bandwidth management allows you to define how much bandwidth each class gets; however,
the actual bandwidth allotted to each class decreases or increases in proportion to actual
available bandwidth.
Application-based Bandwidth Management
You can create bandwidth classes based on individual applications (like VoIP, Web, FTP, E-
mail and Video for example).
Subnet-based Bandwidth Management
You can create bandwidth classes based on subnets.
The following figure shows LAN subnets. You could configure one bandwidth class for
subnet A and another for subnet B.
Figure 267 Subnet-based Bandwidth Management Example
25.1.3 Application and Subnet-based Bandwidth Management
Example
You could also create bandwidth classes based on a combination of a subnet and an
application. The following example table shows bandwidth allocations for application specific
traffic from separate LAN subnets.
Table 139 Application and Subnet-based Bandwidth Management Example
TRAFFIC TYPE FROM SUBNET A FROM SUBNET B
VoIP 64 Kbps 64 Kbps
Web 64 Kbps 64 Kbps
FTP 64 Kbps 64 Kbps
E-mail 64 Kbps 64 Kbps
Video 64 Kbps 64 Kbps