ZyXEL Communications 5 Series - Figure 172 SECURITY > IDP > Anomaly; Table 83 SECURITY > IDP > Anomaly

Chapter 14 Intrusion Detection and Prevention (IDP) Screens
ZyWALL 5/35/70 Series User’s Guide
290
Figure 172 SECURITY > IDP > Anomaly
The following table describes the labels in this screen.
Table 83 SECURITY > IDP > Anomaly
LABEL DESCRIPTION
Protocol Anomaly
HTTP Inspection/TCP Decoder/UDP Decoder/ICMP Decoder
Name This is the name of the protocol anomaly rule. Click a name to display more detailed
information on a rule.
ID This is the unique identifying number for the anomaly rule.
Active Select the head of the Active column to activate all rules for an anomaly detection
method, or select Active for an individual rule to make it active.
Log Select the head of the Log column to generate logs for all rules included in an anomaly
detection method. Select Log to generate a log when a match is found for the
corresponding rule.
See Chapter 32 on page 555 for more information on logs.
Alert Select the head of the Alert column to activate the alert for all rules in an anomaly
detection method. Select Alert to generate an alert log when a match is found for the
corresponding rule.
See Chapter 32 on page 555 for more information on alerts.