Chapter 33 Maintenance Screens
ZyWALL 5/35/70 Series User’s Guide
597
33.9 The Backup and Restore Screen
See Section 49.5 on page 733 for transferring configuration files using FTP/TFTP commands.
Click MAINTENANCE > Backup & Restore. Information related to factory defaults,
backup configuration, and restoring configuration appears as shown next.
Figure 352 MAINTENANCE > Backup and Restore
Backup Configuration
Backup configuration allows you to back up (save) the ZyWALL’s current configuration to a
file on your computer. Once your ZyWALL is configured and functioning properly, it is
highly recommended that you back up your configuration file before making configuration
changes. The backup configuration file will be useful in case you need to return to your
previous settings.
Click Backup to save the ZyWALL’s current configuration to your computer.
Restore Configuration
Load a configuration file from your computer to your ZyWALL.
1 Do not turn off the ZyWALL while configuration file upload is in progress.
Table 205 Restore Configuration
LABEL DESCRIPTION
File Path Type in the location of the file you want to upload in this field or click Browse ... to find it.
Browse... Click Browse... to find the file you want to upload. Remember that you must
decompress compressed (.ZIP) files before you can upload them.
Upload Click Upload to begin the upload process.
To Next Page
Loading...
