ZyXEL Communications 5 Series - Network Address Translation (NAT); Using NAT; SUA (Single User Account) Versus NAT; Applying NAT

ZyWALL 5/35/70 Series User’s Guide
673
CHAPTER 44
Network Address Translation
(NAT)
This chapter discusses how to configure NAT on the ZyWALL.
44.1 Using NAT
" You must create a firewall rule in addition to setting up SUA/NAT, to allow
traffic from the WAN to be forwarded through the ZyWALL.
44.1.1 SUA (Single User Account) Versus NAT
SUA (Single User Account) is a ZyNOS implementation of a subset of NAT that supports two
types of mapping, Many-to-One and Server. See Section 44.2.1 on page 676 for a detailed
description of the NAT set for SUA. The ZyWALL also supports Full Feature NAT to map
multiple global IP addresses to multiple private LAN IP addresses of clients or servers using
mapping types.
" Choose SUA Only if you have just one public WAN IP address for your
ZyWALL.
Choose Full Feature if you have multiple public WAN IP addresses for your
ZyWALL.
44.1.2 Applying NAT
You apply NAT via menu 4 or 11.1.2 as displayed next. The next figure shows you how to
apply NAT for Internet access in menu 4. Enter 4 from the main menu to go to Menu 4 -
Internet Access Setup.