ZyXEL Communications 5 Series - Figure 93 NETWORK > Bridge > Port Roles; Figure 94 Port Roles Change Complete; Table 32 NETWORK > Bridge > Port Roles

Chapter 8 Bridge Screens
ZyWALL 5/35/70 Series User’s Guide
165
The radio buttons correspond to Ethernet ports on the front panel of the ZyWALL. On the
ZyWALL 70, ports 1 to 4 are all DMZ ports by default. On the ZyWALL 5 or ZyWALL 35,
ports 1 to 4 are all LAN ports by default.
Figure 93 NETWORK > Bridge > Port Roles
The following table describes the labels in this screen.
After you change the LAN/DMZ/WLAN port roles and click Apply, please wait for few
seconds until the following screen appears. Click Return to go back to the Port Roles screen.
Figure 94 Port Roles Change Complete
Table 32 NETWORK > Bridge > Port Roles
LABEL DESCRIPTION
LAN Select a port’s LAN radio button to use the port as part of the LAN.
DMZ Select a port’s DMZ radio button to use the port as part of the DMZ.
WLAN Select a port’s WLAN radio button to use the port as part of the WLAN.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.