ZyXEL Communications 5 Series - Table 255 System Maintenance Menu Diagnostic

Chapter 48 System Information & Diagnosis
ZyWALL 5/35/70 Series User’s Guide
724
Table 255 System Maintenance Menu Diagnostic
FIELD DESCRIPTION
Ping Host Enter 1 to ping any machine (with an IP address) on your LAN, DMZ, WLAN
or WAN. Enter its IP address in the Host IP Address field below.
WAN DHCP Release Enter 2 to release your WAN DHCP settings.
WAN DHCP Renewal Enter 3 to renew your WAN DHCP settings.
Internet Setup Test
or
PPPoE/PPTP/3G
Setup Test
Enter 4 to test the Internet setup. You can also test the Internet setup in
Menu 4 - Internet Access. Please refer to Chapter 38 on page 639 for more
details.
This feature is only available for a 3G connection or dial-up connections
using PPPoE or PPTP encapsulation.
Reboot System Enter 11 to reboot the ZyWALL.
WAN If you entered 2, 3, or 4 in the Enter Menu Selection Number field, enter the
number of the WAN interface in this field.
Host IP Address If you entered 1in the Enter Menu Selection Number field, then enter the IP
address of the computer you want to ping in this field.
Enter the number of the selection you would like to perform or press [ESC] to cancel.