ZyXEL Communications 5 Series - The VPN Rules (Manual): Edit Screen; Figure 215 SECURITY > VPN > VPN Rules (Manual) > Edit

Chapter 19 IPSec VPN
ZyWALL 5/35/70 Series User’s Guide
376
19.8 The VPN Rules (Manual): Edit Screen
Click the Add button or the edit icon on the VPN Rules (Manual) screen to open the
following screen. Use this screen to configure VPN rules that use manual keys. Manual key
management is useful if you have problems with IKE key management. See IPSec SA Using
Manual Keys on page 395 for more information about IPSec SAs using manual keys.
Figure 215 SECURITY > VPN > VPN Rules (Manual) > Edit
Encap. This field displays Tunnel or Transport mode (Tunnel is the default selection).
IPSec Algorithm This field displays the security protocols used for an SA.
Both AH and ESP increase ZyWALL processing requirements and
communications latency (delay).
Remote Gateway
Address
This is the static WAN IP address of the remote IPSec router.
Modify Click the edit icon to edit the VPN policy.
Click the delete icon to remove the VPN policy. A window displays asking you to
confirm that you want to delete the VPN rule. When a VPN policy is deleted,
subsequent policies move up in the page list.
Add Click Add to add a new VPN policy.
Table 105 SECURITY > VPN > VPN Rules (Manual) (continued)
LABEL DESCRIPTION