Chapter 28 UPnP Screens
ZyWALL 5/35/70 Series User’s Guide
521
28.2.1.1 Installing UPnP in Windows Me
Follow the steps below to install UPnP in Windows Me.
1 Click Start, Settings and Control
Panel. Double-click Add/Remove
Programs.
2 Click on the Windows Setup tab and
select Communication in the
Components selection box. Click
Details.
3 In the Communications window, select
the Universal Plug and Play check box
in the Components selection box.
4 Click OK to go back to the Add/
Remove Programs Properties
window and click Next.
5 Restart the computer when prompted.
To Next Page
Loading...
