Chapter 32 Logs Screens
ZyWALL 5/35/70 Series User’s Guide
573
ERROR !!! build_id(): Unable
to obtain my DSS keys
RCA encryption in phase 1 failed because the ZyWALL did
not receive the DSS (Digital Signature Standard) keys.
Build Phase 1 ID The router has started to build the phase 1 ID.
Adjust TCP MSS to %d The router automatically changed the TCP Maximum
Segment Size value after establishing a tunnel.
Rule <%d> input idle time
out, disconnect
The tunnel for the listed rule was dropped because there was
no inbound traffic within the idle timeout period.
XAUTH succeed! Remote user:
<Username>
The ZyWALL, acting as authentication server, was able to
authenticate the username given in this log.
XAUTH fail! Remote user:
<Username>
The ZyWALL, acting as authentication server, was not able to
authenticate the username given in this log.
XAUTH succeed! My name:
<Username>
The ZyWALL, acting as an authentication client, provided the
listed username to the authentication server and it was
authenticated.
XAUTH fail! My name:
<Username>
The ZyWALL, acting as an authentication client, provided the
listed username to the authentication server and it was not
authenticated.
Rule[%d] Phase 1 negotiation
mode mismatch
The listed rule’s IKE phase 1 negotiation mode did not match
between the router and the peer.
Rule [%d] Phase 1 encryption
algorithm mismatch
The listed rule’s IKE phase 1 encryption algorithm did not
match between the router and the peer.
Rule [%d] Phase 1
authentication algorithm
mismatch
The listed rule’s IKE phase 1 authentication algorithm did not
match between the router and the peer.
Rule [%d] Phase 1
authentication method
mismatch
The listed rule’s IKE phase 1 authentication method did not
match between the router and the peer.
Rule [%d] Phase 1 key group
mismatch
The listed rule’s IKE phase 1 key group did not match
between the router and the peer.
Rule [%d] Phase 2 protocol
mismatch
The listed rule’s IKE phase 2 protocol did not match between
the router and the peer.
Rule [%d] Phase 2 encryption
algorithm mismatch
The listed rule’s IKE phase 2 encryption algorithm did not
match between the router and the peer.
Rule [%d] Phase 2
authentication algorithm
mismatch
The listed rule’s IKE phase 2 authentication algorithm did not
match between the router and the peer.
Rule [%d] Phase 2
encapsulation mismatch
The listed rule’s IKE phase 2 encapsulation did not match
between the router and the peer.
Rule [%d]> Phase 2 pfs
mismatch
The listed rule’s IKE phase 2 perfect forward secret (PFS)
setting did not match between the router and the peer.
Rule [%d] Phase 1 ID mismatch The listed rule’s IKE phase 1 ID did not match between the
router and the peer.
Rule [%d] Phase 1 hash
mismatch
The listed rule’s IKE phase 1 hash did not match between the
router and the peer.
Rule [%d] Phase 1 preshared
key mismatch
The listed rule’s IKE phase 1 pre-shared key did not match
between the router and the peer.
Table 188 IKE Logs (continued)
LOG MESSAGE DESCRIPTION
To Next Page
Loading...
